*The store has not been updated recently. You may want to contact the merchant to confirm the availability of the product.
LIST PRICE: 760
YOUR PRICE: 540
YOU SAVE: 220
FREE SHIPPING !!!!!!!!!!!!!!!!!!!!!
FAST! Dries Hands Completely in 10-15 Seconds
Excel’s research team has developed the XLERATOR® with patented technology that delivers
three-times-faster hand drying performance. Conventional hand dryers take from 30 to 45 seconds
to get a user’s hands totally dry, and very few of us are willing to wait that long. With the
automatic sensor-activated XLERATOR, not only do your hands get dry in 10 to 15 seconds, but
consumer test participants report that their hands also felt warm, soft and really dry.
Uses 80% Less Energy.
Not only does the XLERATOR dry hands in one third of the time required by conventional hand
dryers, our hand-drying system is designed to run on 15-amp service (making it great for older
buildings). The combination of these two factors results in 80% less energy cost per use vs.
conventional hand dryers.
GreenSpec® Approved and Qualifies for LEED® Credits.
XLERATOR is the first hand dryer to be GreenSpec Listed because it meets a number
of GreenSpec standards; conserves energy, has low maintenance requirements and reduces waste.
XLERATOR helps your facility qualify for several different LEED (Leadership in Energy and Environmental
Design) Credits in the new 2009 Rating Systems including EA Credit 1 - Optimize Energy Performance,
now a mandatory credit for any LEED-certified facility.
XLERATOR also lowers a facility's Carbon Footprint. Ask to see our Life Cycle Assessment (LCA) Study Results.
95% Cost Savings vs. Paper Towels
Converting to the XLERATOR hand dryer will result in more than a 95% savings vs. paper towel costs. In addition to paper
towels, the following costs are also eliminated: ordering, storing, replenishing, collecting and disposing of bacteria-laden paper
towel waste. This results in a Payback of Less Than One Year!
Setting a New Standard
After seven years in the marketplace, the XLERATOR hand dryer has received numerous awards and
designations, appeared in case study articles done by prestigious trade publications, and been featured on
national television programs! Because of its proven performance and customer satisfaction, XLERATOR is
being specified in many high-profile facilities and has become... THE NEW INDUSTRY STANDARD!
A F a s t Hand Dryer.
Best New Product - Technology
(International Hotel, Motel and Restaurant Show)
Top Ten Green Product
(Environmental Building News)
Award for Design Excellence (ADEX)
(Design Journal ADEX Platinum Award)
Citation of Excellence
(Buildings Product Innovations Awards)
Featured Art icles
The Wall Street Journal
American School and University
Environmental Design and Construction
(Available on CD. Or view
this and other videos on
our web site.)
Tele vision Appearances
Ask about our Promotional Video
As seen on CNN Headline News
hosted by Terry Bradshaw.
XLERATOR® IS RECEIVI NG A LOT OF ATTENTIO N
Excel Dryer has been awarded a contract by the GSA (General Services Administration)
which offers special pricing to all Federal Government Agencies.
XLERATOR® HAND DRYER
A. Cover shall be one of the following: Die-cast zinc alloy - One-piece, heavy-duty,
rib‑reinforced, lightweight, unbreakable, rustproof and all exposed surfaces shall
be bright chrome plated or finished with chip-proof, electrostatically applied epoxy
paint. Bulk Molding Compound (BMC) – White reinforced thermoset polymer.
Stainless Steel – with a brushed finish. Special Image – Digital image applied to
cover using patented Kolorfusion Sublimation Decoration process. All covers will
be fastened to a wall plate by two chrome plated tamper-proof bolts.
B. Wall plate shall be equipped with (3) 7/8" (22 mm) diameter holes, one of which
shall be suitable for use with surface conduit, for ease of wiring.
C. All internal parts shall be coated according to Underwriters' Laboratories, Inc.
D. Entire mechanism shall be internally grounded.
E. Optional recess kit includes a wall box (22 ga) and dryer mounting plate (16 ga)
made from 18-8 Type 304 brushed stainless steel. A stainless steel tether is
connected to the dryer mounting plate to hold the dryer in position when servicing.
A. Motor shall be a thermally protected, series commutated, through-flow discharge
vacuum motor/blower (5/8 hp / 20,000 rpm) which provides air velocity of up to
19,000 lfm (linear feet per minute) at the air outlet and 16,000 lfm at the
hands (4 inches [102 mm] below air outlet).
B. Heating element (970 w) is constructed of Nichrome wire and mounted inside
the blower housing, thereby being vandal proof. It shall be protected by an
automatic resetting thermostat, which shall open whenever air flow is cut off
and shall close when flow of air is resumed. It shall produce an air temperature
of up to 135°F (57°C) at a 72°F (22°C) ambient room temperature at the hands
(4 inches [102 mm] below air outlet).
C. Control assembly is activated by an infrared optical sensor located next to the
air outlet. The dryer shall operate as long as hands are under the air outlet.
There is a 35-second lockout feature if hands are not removed.
The dryer shall be guaranteed to be free from defects for a period of five (5) years.
Warranty shall include labor performed at factory as well as the repair or exchange
of defective parts, at manufacturer's option.
One dryer for every two washbasins is sufficient for most applications. If restroom
traffic is unusually heavy, we suggest one dryer per washbasin in small installations
and two dryers for every three washbasins in larger installations. When a 54"
washfountain is used, we suggest four to five dryers.
Dimensions: 11 3/4" lg. X 12 11/16" high x 6 11/16" deep
(298 mm lg. X 322 mm high x 170 mm deep)
Weight: XL-BW - 15 lbs. (6.80 kgs.) XL-SB 16 lbs. (7.26 kgs.)
XL-W, XL-GR, XL-C, XL-SI - 17 lbs. (7.71 kgs.)